- July 11, 2016
- Posted by: GK's Custom Polishing, Inc.
- Category:
Stamped Concrete Refinishing This customer contacted us because their stamped concrete looked dirty and washed out. They also had new stamped concrete installed that was not the same color as the original stamped concrete around the pool. The stamped concrete was thoroughly cleaned to remove all dirt, contaminants and loose sealer from the concrete. Two
- July 8, 2016
- Posted by: GK's Custom Polishing, Inc.
- Category:
Stamped Concrete Refinishing The old sealer on the stamped concrete wore off the surface from years of being exposed to the elements. Along with the sealer, the color in the concrete washed away as well. GK's was called into restore this patio to new! Any remaining coating was removed from the concrete. The concrete was
- July 7, 2016
- Posted by: GK's Custom Polishing, Inc.
- Category:
Restaurant Travertine Floor Restoration The travertine floor in this upscale restaurant is maintained by GK's Custom Polishing, Inc. The floor is maintained every 4-6 months to restore the luster. Our technicians carefully work around the bordering wood surfaces. A clean and bright floor means high impressions on your customers. At GK's Custom Polishing, Inc., perfection
- July 7, 2016
- Posted by: GK's Custom Polishing, Inc.
- Category:
Commercial - Onyx Bar Restoration This onyx bar top was severely etched from food and liquor contact over the years. The onyx was fully refinished, removing all wear from the surface. Masking and plastic was put up to protect all of the surrounding surfaces. The onyx was honed 2 stages to remove etch marks and
- July 7, 2016
- Posted by: GK's Custom Polishing, Inc.
- Category:
Commercial - Limestone Floor Restoration The customer contacted us to refinish the limestone floor in the lobby of their headquarters. The limestone floor had not been refinished since it was installed. The floor looks brand new now! The limestone was honed two stages to remove all scratches and wear. Holes were filled with an epoxy
- July 6, 2016
- Posted by: GK's Custom Polishing, Inc.
- Category:
Metallic Epoxy Project This customer contacted GK's Custom Polishing, Inc. to finish the concrete floor in his basement. The goal of this project was to make the floor finish look like water. The floor was ground and cracks were filled to prep for the coating. One coat of a dark blue primer was applied. One